CSR8645 Bluetooth 4.0 – APT-X MP3 AAC FastStream – Breakout Board
Table of Contents
Die Erfahrung hat gezeigt, dass ein Großteil/Alle günstig am Markt erhältlichen Bluetooth-Module Probleme verschiedenster Art haben. Sei es nun, dass sie Störungen generieren, Störgeräusche empfangen, eine schlechte Reichweite haben und/oder klanglich unterirdisch sind.
Dieses Modul auf Basis des CSR8645 bietet
Spezifikation
- Eingangsspannungsbereich 5.5-40V (TPS7A6601), 5.0V (USB)
- alternativ 6.0-60V (TPS54061) mit Flybuck und isolierter Versorgung des Linedrivers
- störungsfreier Betrieb
- DSP/EQ (Kalimba DSP)
- 2Vrms Ausgangspegel unsymmetrisch über 3.5mm Klinkenbuchse oder 1×3 Pinheader per DRV602 Linedriver
- Symmetrischer Ausgang am DAC
- unsymmetrischer Eingang (AUX Line) via 3.5mm Klinkenbuchse
- AAC, MP3, APT-X, FastStream
- USB-Audio (optional)
- Programmierung über USB, ohne Programmer
- 5 Taster (optional); auch verfügbar auf 1×7 Buchsenleiste
- 3 LED (optional)
- 10 GPIO an 1×12 Buchsenleiste
- 1V8 <-> 3V3 Levelshift für SPI/Programmer
- u.FL Antennenanschluss
- und, bei Verwendung einer externen Antenne, ca. 40m Reichweite
Hardware
TPA3116r…
Messungen
Loopback EMU-0202 (Referenz)
Statisches Rauschen
1kHz Spektrum via BT-Link
1kHz Spektrum via AUX Line-In
Modulation Distortion – Aux Line-In
Es el convertidor flybuck seleccionado para conducir este tablero si, por ejemplo; utilizar esto en un estéreo portátil y tienen problemas de ruido / groundloop? O es la PSRR de la TPS7A6601 suficiente para esta aplicación?
Correcto, eso es lo que es para. El problema principal está relacionado con bucle a tierra cuando se mira en un amplificador de construir totalmente. Estos BT-IC realizan algún ruido cuando la conexión a tierra / diseño / cableado es malo. Para ello existen dos soluciones implementadas en esta placa. La primera flybuck, la segunda DRV602 Linedriver con planta de ciclo automático. Ver TI AN SLOA143.
GroundLoopBreakCircuitsandTheirOperation
Hasta ahora no he necesitado la flybuck, que siempre trabajó con la DRV602 solo. Parece que el diseño no es tan malo. 🙂
Regards, Christian
Eso se ve fantástico y es en realidad lo único que se corresponde con el chip. ¿Hay algún lugar para comprar el tablero? O Esquemas + lista de materiales?
tablas desnudas están todavía disponibles.
Me gustaría el esquema final + BOM si está disponible. O se podría comprar?
Si usted tiene una tabla, a continuación, con mucho gusto lo compre. Incluso puedo comprar dos tablas, si está disponible.
Mejor,
Alejandro
Hi nice work.
Im currently working on a hobby project for the F3188.
Its a hard time to find documentation about this.
Is there any chance you could share the schematics or some documentation of the F3188?
Please head over to http://www.stromrichter.org
Hi, I picked this thread on diyaudio.com forum, and I would like to ask if this board will be up for sale? I would pretty much prefer this over questionable breakouts from alixpress…
I have some bare (unpopulated) boards available, you’ll need to solder them on your own. Regards, Christian
Did you actually try to program the this one?
How would you go about programming it?
You’ll need an SPI-USB programmer to do so, they’re available on i.e. Aliepxress (3rd party). Programming is done by the tools provided from CSR.
Fue la APTX activada de forma predeterminada o módulo es necesario actualizar por el programador?
Saludos.
Sí, funciona fuera de la caja.